ProBasics 19" Steel Transport Chair
- 33.00 LBS
- Calculated at Checkout
Featuring a fold-down back for easy storage, removable swingaway footrests, durable nylon upholstery and the added safety of push-to-lock rear wheel locks and a seatbelt, users will feel safe and comfortable in this steel transport wheelchair.
- 27 lb. Lightweight steel frame
- Removable, swingaway footrests for easy transfer
- Padded armrests for added comfort
- Back easily folds down for storage and travel
- Push-to-lock rear wheel locks provide additional safety
|Item Number||9105 | 0005|
|Product Weight||27 lb.|
|Seat Dimensions||17" W x 16" D|
|Seat to Floor Height||19"|
|Shipping Weight||33 lb.|
|Warranty Frame||Limited Warranty - 5 Year - Welds, Crossbraces|
|Weight Capacity||300 lb.|
Measure from the bottom of the seat to the top.
Measure at the widest point of the body from knee to hip, then add approximately an inch to add some “wiggle room.” Keep in mind that bulkier clothing (such as a winter coat) will require additional width to maintain equivalent space.
Measure from the backside to the inside of the knee, then subtract approximately two inches. You may add several inches if you prefer more leg overhang to allow for easier leg lifting.
The higher the camber the more stable and agile, but also the more limited it becomes passing through narrow spaces. A typical daily wheelchair uses three degrees of camber.
Measure horizontally. A tighter angle facilitates tighter steering. The preferred angle will depend on the knee’s ability to bend. The resulting angle will also determine how far the toes extend from the body.
Front Seat to Floor
Measure from the underside of the knee to the sole of the foot. Subtract the thickness of the compressed cushion, and add approximately two inches for footrest clearance (unless the wheelchair will be foot-propelled).
Rear Seat to Floor
Measure from the ground to the seat bottom. This determines the seat‘s slope angle (known as its "dump" or "squeeze).